1/32 Scale Slot Cars

silver64 · **Posted:** Sat Jan 19, 2008 1:58 am

okey dokey!! I'd love to! What voltage is the track? I have some Parma cars still....

61falconwagon · **Posted:** Sat Jan 19, 2008 2:23 am

the escort is a rs 200

info on the car i have

pics from race night

keith

61falconwagon · **Posted:** Sat Jan 19, 2008 2:26 am

gtvert01 · **Posted:** Sat Jan 19, 2008 9:26 am

Jim,

The track is 16 VDC. I have a transformer for each lane so you don't get that power surge when someone lets off...like I used to do to Keith all of the time when he was in the corners... :devious:

Like Keith said you have to get the home motors to run them. The other motors pull too many amps for the power supplies and the controllers.

As seen in the first picture that Corvette's sharp nose was always up the butt of my Boss.

Keith and I have been getting the majority of our stuff at Hobby Works in Bel Air. If you go there tell Kevin Dave Seibert sent you. Here are where the others are located

61falconwagon · **Posted:** Sat Jan 19, 2008 10:45 am

Hey jim i have 2 16d parma home motors i can lend you for a night of racing. I picked up two of them on ebay for 10 bucks a piece. I wouldn't have hit that stang if it wasn't so slow :bs:

keith

61falconwagon · **Posted:** Sat Jan 19, 2008 10:49 am

16d home motor on ebay

ssp mustang · **Posted:** Sat Jan 19, 2008 2:25 pm

Cool Cars Keith!!! :btu:

silver64 · **Posted:** Sat Jan 19, 2008 7:18 pm

SWEET! 16D's are what I ran almost exclusively. I've got 1 or 2 Super 16s, and 1 or 2 Group 27s, but the 16D's were the most popular at Hot Slots because of cost and league rules. Yup have a few Womps, and I know exactly how slippery foamies are on plastic track! :yikes:

61falconwagon · **Posted:** Sat Jan 19, 2008 7:58 pm

gtvert01 · **Posted:** Sat Jan 19, 2008 9:16 pm

61falconwagon · **Posted:** Mon Jan 21, 2008 1:18 pm

hey guys check this out

you can buy this chassis for under 20 bucks

and then buy a 1/32 scale body for 6 bucks at the hobby shop in bel air and build a cool car for under 30 bucks

here is mine

gtvert01 · **Posted:** Sat Jan 26, 2008 8:34 am

Got some more track and laid it out how I wanted. Now to add scenery and elevation. The two hairpins are going to wind up a hill.

Double Hairpins! :devious:

Double Crossovers! :devious:

The hairpins and crossovers came with cars so now I have a pair of Boxsters and TTs. These are high impact cars meaning they aren't very detailed and can take a beating. These will be used by Craig's friends when they come over.

ssp mustang · **Posted:** Sat Jan 26, 2008 11:04 am

Your track sure looks good Dave. :btu:

61falconwagon · **Posted:** Sat Jan 26, 2008 6:03 pm

silver64 · **Posted:** Sat Jan 26, 2008 8:12 pm

61falconwagon · **Posted:** Sat Jan 26, 2008 8:14 pm

silver64 · **Posted:** Sat Jan 26, 2008 9:17 pm

61falconwagon · **Posted:** Sat Jan 26, 2008 10:58 pm

silver64 · **Posted:** Sat Jan 26, 2008 11:21 pm

gtvert01 · **Posted:** Sat Jan 26, 2008 11:32 pm

Mustang Club of Maryland

1/32 Scale Slot Cars

Who is online