Mustang Club of Maryland

Home of the Mustang club of Maryland
It is currently Fri Jul 04, 2025 10:25 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: CJ Pony Parts CAD
PostPosted: Thu Jul 28, 2011 10:12 pm 

Joined: Sun Jul 24, 2011 9:10 am
Posts: 55
Location: Aberdeen, Md
I'm a newbie here, so forgive me if I missed something, but is anyone going to CJ on the 13th of Aug.? I'm going to check my schedule at work in the morning to see if I work (I make the Sat Sched. but I don't remember, plus, I'm one of the bosses, so I can make someone work for me). It sounds like a good time, plus a decent ride.

_________________
Tonite gentlemen, WE RIDE!!!


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Thu Jul 28, 2011 11:19 pm 
User avatar

Joined: Sun Oct 08, 2006 8:47 am
Posts: 1127
Location: Usually in the fog of often-timers
I plan on going and would love to cruise. FYI, Rumor control: I spoke with Scott about charging for a spot. He said there were a number of guys that wanted to park with there club members and so they came up with charging to hold spots for those who wanted that. If we cruise up as a group we will get there at the same time and so park next to each other. In the past we have met at the park and ride at MD 439 and I83. It is the last exit in Md. about 1hr 15min from there.

_________________



Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Fri Jul 29, 2011 11:05 pm 

Joined: Sun Jul 24, 2011 9:10 am
Posts: 55
Location: Aberdeen, Md
I am in fact off that Saturday, so me & my family will be making the trip. What time do you guys usually leave the park & ride? I'm pretty excited about the trip. Won't have a lot of money to spend as we're going to Cooperstown the following weekend, but I have my eyes on some t-shirts for the four of us. This is my second Mustang, my first being an 86 that had Mass Air Conversion, 2 1/2 in exhaust, dual chamber Flows, bigger Mass Air & T.B. Had to sell it when she got pregnant the first time. My boys both love Stangs so their fired up to see all the cars at CJ's. :3gears:

_________________
Tonite gentlemen, WE RIDE!!!


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Mon Aug 01, 2011 8:07 pm 
User avatar

Joined: Tue Feb 14, 2006 10:13 pm
Posts: 1414
Location: Sector 7G or Colora, MD
YEAH! I can actually go!! What time are we meeting at the park and ride? The event starts at 9 and about an hour from the park and ride. Meet between 7:30-8:00 to leave by 8?

_________________
Dave

by , on Flickr
Some people are like Slinkys. They have no purpose, but they sure bring a smile to your face when you push them down the stairs.


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Tue Aug 02, 2011 9:06 pm 

Joined: Sun Jul 24, 2011 9:10 am
Posts: 55
Location: Aberdeen, Md
I should be able to be there by 7:30/7:45. My kids can sleep in the car if they have to.

_________________
Tonite gentlemen, WE RIDE!!!


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Tue Aug 02, 2011 11:12 pm 
User avatar

Joined: Sun Oct 08, 2006 8:47 am
Posts: 1127
Location: Usually in the fog of often-timers
I go early because they always have a number of items set out at reduced prices with the proceeds going to the four diamonds charity. Gotta get there before the mob to cash in. See ya there.

_________________



Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Wed Aug 03, 2011 7:54 am 
User avatar

Joined: Wed Feb 15, 2006 3:46 pm
Posts: 1305
Location: edgewood,md
I'll be there. leaving Aberdump 7am

_________________
Image
"I think people are so passionate about Mustang because it gives you a sense of freedom. especially in a red convertible.


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Wed Aug 03, 2011 3:00 pm 

Joined: Sun Jul 24, 2011 9:10 am
Posts: 55
Location: Aberdeen, Md
Same here, leaving Aberdump about 7am. Only holdup would be wife & kids. If they're movin' a little slow, it might be closer to 7:10!! LOL!!

_________________
Tonite gentlemen, WE RIDE!!!


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Fri Aug 05, 2011 7:05 am 
User avatar

Joined: Tue Feb 14, 2006 10:13 pm
Posts: 1414
Location: Sector 7G or Colora, MD
Dan are you going straight up to the park and ride or are you meeting anyone at the Royal Farms at Rte 1 and 136?

_________________
Dave

by , on Flickr
Some people are like Slinkys. They have no purpose, but they sure bring a smile to your face when you push them down the stairs.


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Sun Aug 07, 2011 2:13 pm 

Joined: Thu Jul 14, 2011 11:44 pm
Posts: 2
Location: Jarrettsville
If the regearing goes right friday night im in for cruise'n up from 439/83. my plans are to leave cj and go over to american muscle, get a hotel so i dont have have to do it all over on sunday.

mike


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Wed Aug 10, 2011 10:13 pm 
User avatar

Joined: Wed Feb 15, 2006 3:46 pm
Posts: 1305
Location: edgewood,md
Dave we can meet at is it WaWa or Royal farms. my step son is taking his King Cobra too. meet u there at 7 . ok

_________________
Image
"I think people are so passionate about Mustang because it gives you a sense of freedom. especially in a red convertible.


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Wed Aug 10, 2011 11:57 pm 

Joined: Sun Jul 24, 2011 9:10 am
Posts: 55
Location: Aberdeen, Md
Dan, I was gonna see if I could meet up with you and Dave at Wawa but no way could I get my family out the door to be at Rt1 & 136 by 7. Are you guys going from there to 439? If you are, I'd like to meet you guys there. I could be there by 7:30-7:45.

_________________
Tonite gentlemen, WE RIDE!!!


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Thu Aug 11, 2011 8:59 am 
User avatar

Joined: Tue Feb 14, 2006 10:13 pm
Posts: 1414
Location: Sector 7G or Colora, MD
Yes we would go from the WAWA to the Park and Ride. Usually we leave the Park and Ride by 8:00 am. I think we could meet at 7 to leave by 7:15 to head to the park and ride...if we go later we may miss the group. Might be time to get the cattle prod out. :btu: That's what I need to do to my family sometimes.

Of course I haven't seen a list of people that are going to go so we may be "the group." LOL!

_________________
Dave

by , on Flickr
Some people are like Slinkys. They have no purpose, but they sure bring a smile to your face when you push them down the stairs.


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Thu Aug 11, 2011 10:38 am 

Joined: Sun Jul 24, 2011 9:10 am
Posts: 55
Location: Aberdeen, Md
Maybe we should start a thread to try to find out who's going so we can get an idea. I'm pretty pumped, it's my first time there. Wish i had know about them when i had my first Stang!!

_________________
Tonite gentlemen, WE RIDE!!!


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Thu Aug 11, 2011 12:20 pm 
User avatar

Joined: Tue Mar 07, 2006 8:18 am
Posts: 458
Location: Dundalk
I'm hoping to go, will see you at the Park-n-Ride at MD 439. :banana2:


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Thu Aug 11, 2011 1:57 pm 
MCA Regional Director
MCA Regional Director

Joined: Thu Jul 05, 2007 6:15 pm
Posts: 967
Location: Perry Hall, Md
Where is the MD-439 Old York Road Park and Ride and where is the WAWA you were meeting at?

BobT, Are you going this year?


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Thu Aug 11, 2011 2:46 pm 
User avatar

Joined: Sun Oct 08, 2006 8:47 am
Posts: 1127
Location: Usually in the fog of often-timers
I already threw my hat in the ring but thought I'd be more specific. I intend to be at CJ's by 8:00am so I will be leaving the P&R at 6:30am. I will cruise through and if anyone wants to go with; please blow your horn to let me know.

_________________



Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Fri Aug 12, 2011 8:09 am 
User avatar

Joined: Tue Feb 14, 2006 10:13 pm
Posts: 1414
Location: Sector 7G or Colora, MD
I think with this title this could be the thread for the official who is going. Ok Paul we will catch you up there.

For those not going up super early. We will meet at the Park and Ride between 7:30-8:00 to leave by 8ish. We will have a mini-cruise from the WAWA at the intersection of Rte 1 and 136 leaving between 7:00-7:15.

Attached is a map to the Park and Ride for those that just want to meet up there. The "A" is where the park and ride is located.


Attachments:
I-83&439P&R.jpg
I-83&439P&R.jpg [ 398.04 KiB | Viewed 9722 times ]

_________________
Dave

by , on Flickr
Some people are like Slinkys. They have no purpose, but they sure bring a smile to your face when you push them down the stairs.
Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Fri Aug 12, 2011 9:06 am 
User avatar

Joined: Wed Feb 15, 2006 3:46 pm
Posts: 1305
Location: edgewood,md
That would be great Mark. hope to see you there. you need a break. lol. see you a WaWa Dave.

_________________
Image
"I think people are so passionate about Mustang because it gives you a sense of freedom. especially in a red convertible.


Top
 Profile  
 
 Post subject: Re: CJ Pony Parts CAD
PostPosted: Fri Aug 12, 2011 8:36 pm 

Joined: Sun Jul 24, 2011 9:10 am
Posts: 55
Location: Aberdeen, Md
Lookin' forward to going tomorrow. Looking more foward to meeting you guy's!! Just got my membership packet in the mail yesterday, stickers in the window, cars clean and shined up. LET'S RIDE!! I should be at the park & ride by 7:30-7:40.

_________________
Tonite gentlemen, WE RIDE!!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group