| Mustang Club of Maryland http://mustangclubofmd.com/phpbb/ |
|
| Anybody have intelligence with 5.0 engines? http://mustangclubofmd.com/phpbb/viewtopic.php?f=28&t=1336 |
Page 1 of 1 |
| Author: | fastblknotch [ Tue Aug 14, 2007 10:45 am ] |
| Post subject: | Anybody have intelligence with 5.0 engines? |
| Author: | 5.7Lmustang [ Tue Aug 14, 2007 7:34 pm ] |
| Post subject: | |
First of all buy the performance gasket kit from Ford Racing! I would buy a new spider brace for the lifter valley underneath the intake. I don't know if you need a crank spacer or not, I did for the 347. Buy a good set of roller rockers and make sure the valve springs are good enough lift wise for the cam. Also a windage tray helps alot with these strokers. Buy a stronger timing chain set with hardened cam gear. Also the stock valve covers won't work with roller rockers cause of the baffle. Hope this helps |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|